How Do I Reset My Baby Optics Monitor?

Baby sleeping in cribBaby sleeping in crib

When you buy through our links, we may earn an affiliate commission.

A baby monitor allows new parents to keep a close eye on their infant without actually being in the room. Having a new baby is hard, but having a baby monitor makes it a little easier. An Infant Optics baby monitor is an excellent choice, but you might need to reset the device when it malfunctions. How do you do that? 

It is simple to reset your Infant Optics baby monitor. All you have to do is disconnect both units from battery and electrical power, then wait about 15 seconds before reconnecting them to the power sources. This will reset the monitor and hopefully fix any issues you are experiencing. 

You may experience a few problems with your monitor that will force you to reset your device. Keep reading to discover what situations may call for this and some tricks to keep in mind. 

How Do I Reset My Baby Optics Monitor? 

All different versions of Infant Optics baby monitors are a lifesaver for parents who need a little help with keeping their eyes on their baby while they sleep. It gives them the power to take a breather or deal with other obligations while still ensuring their child is looked after. 

Still, even the best devices sometimes have glitches. An Infant Optics baby monitor may experience malfunctions that prevent it from working as it should. In this case, the first thing you should try is resetting your device.

Luckily, resetting your baby monitor is a very simple process. You simply take both of the units that make up your system, the camera in your nursery and the monitor you watch your baby on, and disconnect them from the power source. You need to ensure that both the electrical power and the battery are disconnected for this to work.

Leave the power sources turned off for around 15 seconds. Then, reconnect both devices. This will hopefully fix some of the problems you are experiencing. 

Some Problems That Call for Resetting Your Monitor

Infant Optics is many parents’ go-to baby monitor brand. This is why they are some of the best-selling baby monitors online and in stores. However, every product comes with its share of common problems. A few of the issues you may experience include: 

  • The monitor won’t switch on 
  • The battery won’t hold its charge 
  • You can’t hear any audio 

Simply resetting the unit should fix these issues and help your monitor work properly. However, there are a few other things you can try to combat these problems. 

The Monitor Won’t Switch On

There’s no bigger problem than having a baby monitor that won’t even turn on. If resetting doesn’t work for this, you can try an alternative fix.  

Ensure the monitor and camera are turned on and that the camera is properly connected to the power source. If that still doesn’t work, hold down the power button for a few seconds, then try turning it on. 

The Battery Won’t Hold a Charge 

You need to use your Infant Optics baby monitor wherever you go. For this reason, the portable power the battery provides is crucial. If everything appears in working order and there are no issues with wires or damage to the battery, you can also try and reset the battery. 

To reset the battery, take it out of the device and leave it out for around 30 minutes. Then, replace the battery and see if the monitor works better. If not, it might be time to buy a new battery. Contact customer support to do this if your device is still covered under warranty. 

You Can’t Hear Any Audio

Infant Optics baby monitors come equipped with a microphone to let you know when your baby is crying and hear other important audio in your nursery. If this is your problem, it’s likely an issue with either the volume or the microphone. 

The easiest fix is to make sure the volume is not turned all the way down. If the volume is turned up to an audible level, it could be an issue with a faulty speaker or microphone, which will cause distorted sound. Contact customer support if resetting or turning the volume up does not work.  

Other Problems 

The other common problems with Infant Optics baby monitors that you might be able to fix with a simple reset can also be fixed by ensuring the unit is properly connected to a power source. These include:

  • No signal
  • A black monitor
  • Loud beeping noises
  • Non-functioning buttons
  • Malfunctioning night vision

If you try all the fixes mentioned above to no avail, check if you still have an active warranty on your baby monitor. If so, you could get a free replacement. 

Will Resetting Your Baby Optics Monitor Help? 

Resetting your Infant Optics baby monitor is a very simple process. You just need to disconnect the units from both power sources for 15 seconds, then reconnect them. This will help you fix different issues and get your monitor to work as it should. 

Keep Reading