Blink Sync Module Blinking Green: What It Means

Blink Sync Module Blinking Green: What It MeansBlink Sync Module Blinking Green: What It Means

When you buy through our links, we may earn an affiliate commission.

If you have a Blink camera home security system, you need the sync module to properly operate the system. Issues arise, and your sync module is now blinking green.

If your Blink Sync Module is blinking greens it means that the internet is not connected properly. This problem can be solved by restarting your WiFi router, attempting to connect the module to the WiFi again, moving the module closer to the router, or contacting your internet service provider. 

In this article, we are going to step through the four tactics you can and should take in order to properly connect your Blink Sync Module to the internet so that it stops blinking green and starts working properly.

What Does it Mean When a Blink Sync Module is Blinking Green?

Before we dive into the solutions you can take to fix the blinking green light on your Blink Sync Module, it’s first important to understand why it’s happening. 

If your Blink Sync Module is blinking green, it is not connected to the internet. The issue could be:

  • The module was set up improperly.
  • The module is too far away from the router
  • Your WiFi isn’t functioning properly. 
  • You do not have the bandwidth to support the device. 

However, as with most tech problems, it’s almost impossible to find out what the issue is before attempting to solve it. 

So let’s find out what you can do if your Blink Sync Module is blinking green to connect it to the internet! 

How to Fix a Blink Sync Module That Is Blinking Green

Luckily, there are four fairly easy tactics that you can try right now if your Blink Sync Module is blinking green and, therefore, is not properly connected to the internet. 

1. Restart Your WiFi Router

Restart your wifi network

The very first thing you should do if your Blink Sync Module isn’t connecting properly to your home wireless network is to simply restart your router. 

Although it sounds almost too good to be true, usually, this will do the trick! The age-old tactic of unplugging the router, leaving it for a few minutes, and plugging it back could be the only thing you need to do. 

However, if after restarting the WiFi router, the light is still blinking green, don’t worry. There are three more options you can try. 

2. Connect the Module to the WiFi Again

It’s possible that your Blink Sync Module is not properly connected to your home wireless network. To find out if this is the problem, here’s what you need to do:

  1. Open the Blink app on your mobile device. 
    Blink app
  2. Click the “Settings” gear icon on the bottom of the screen. 
    Blink - settings
  3. TapDevice and System Settings.
    Blink - device and settings
  4. Select the Sync Module from the list of available devices. 
    Blink - select the sync module
  5. Click Change WiFi network. 
    Blink - change wifi network
  6. Follow the prompts to discover your device and connect to your WiFi. 

Here’s a quick video we made so you can follow along:

If it’s still blinking green, you can try restarting the module by unplugging it for a few minutes and then plugging it back in. 

But if that still doesn’t work, it’s likely that your Blink Sync Module is too far from the WiFi router. 

3. Move the Blink Sync Module Closer to the Router

It’s important to note that the Blink Sync Module should be no further than 30 feet away from your WiFi router. So if it is, you should move either the module closer to the router or vice versa. 

Your cameras can be up to 100 ft from the sync module.

As well, there is a chance that the module won’t connect to the router because of interference. This can be caused by microwaves, baby monitors, or cement or adobe walls. 

If you notice that any of these things are between your module and WiFi router, you will again need to move one or the other to a new location. 

4. Contact Your Internet Service Provider

Finally, if solutions 1-3 didn’t work and your Blink Sync Module is still blinking green and isn’t properly connected to the internet, you need to call your internet service provider. 

They may let you know that the internet is simply down at the moment, in which case, there is nothing you can do but wait for it to return.

However, it may be that the package you opted for doesn’t have the bandwidth to provide the module with sufficient internet service. 

In this case, you will likely have to purchase increased bandwidth in order to enjoy your Blink Sync Module. 

Related Articles

Keep Reading