How to Check, Charge, and Change the Battery on a Ring Stick Up Camera

RIng stick up camRIng stick up cam

When you buy through our links, we may earn an affiliate commission.

If you’re using a Ring Stick Up Camera and want to check the battery life, charge it, or replace the battery, here’s a quick guide to walk you through all three steps.

How to Check Battery Life

  1. Open the Ring App: Start by opening the Ring app on your phone.
  2. Access Camera Settings: Select your camera and open its Settings.
  3. Go to Power Settings: Scroll down and tap on Power Settings.
  4. Check Battery Level: The current battery percentage will be displayed here. If it’s low, it’s time to charge the battery.

How to Change the Battery

  1. Unlock the Camera’s Battery Compartment:
    • Look for the lock and unlock symbols on the back of the camera.
    • Twist the compartment to the unlock position and pull to open.
  2. Release the Battery:
    • Push down on the silver release tab to eject the battery.

How to Charge the Battery

  1. Connect the Charger: Use a micro USB cable to connect the battery to a charger.
  2. Check the Charging Lights:
    • A red light indicates the battery is charging.
    • Once the red light turns off, the battery is fully charged. This usually takes a couple of hours.
  3. Reinsert the Battery: Place the fully charged battery back into the camera and twist the compartment back to the lock position.

That’s it! With these steps, you’ll keep your Ring Stick Up Camera running smoothly. 

Keep Reading