By Trae Jacobs,
When you buy through our links, we may earn an affiliate commission.
The Ring solar panel is an eco-friendly way to charge Ring devices, like a Ring doorbell camera. However, situations could arise where your Ring solar panel does not charge. Why is your Ring solar panel not charging, and how can you fix it?
The Ring solar panel may not charge if there is insufficient sunlight, bad wiring, or damage to the panel. To fix this, ensure direct sunlight to solar panels and repair or replace the damaged solar panel.
Why is My Ring Solar Panel Not Charging?
It can be frustrating when your solar panel is not charging. But, the problem is usually easy to fix.
There are several reasons why your Ring solar panel may not charge.
These reasons include the following:
- There is no direct sunlight.
- Your battery life is full.
- Your device is incompatible with the Ring solar panel.
- A defect within the solar panel.
- The solar panel needs to be reinstalled.
Below, we’ll discuss each reason and offer solutions.
Inadequate direct sunlight is one of the most common reasons your Ring solar panel is not charging. To fully charge, these panels must be exposed to four to five hours of direct, unobstructed sunlight daily.
To fix this problem, ensure there are no obstructions between your solar panel and the sun or move your panel out of the shade.
The Ring solar panel provides a supplemental power source for your other Ring products.
However, the Ring solar panel is not programmed to charge unless a Ring product’s battery percentage is below 90%.
A “not charging” sign on the Ring solar panel could indicate that your doorbell or camera’s battery life is still high.
This is done to avoid overcharging, which can be harmful to the battery.
If you cannot charge your Ring products with the solar panel, the two devices may be incompatible.
The Ring solar panel is used to charge Ring doorbells and cameras, but it’s not compatible with every device.
For example, the traditional Ring solar panel is incompatible with a Ring spotlight camera.
If you want to charge this device, you’ll need the Super Solar Panel.
If your Ring solar panel is not charging, it could be damaged.
Damage can occur due to bad weather conditions, poor maintenance, or manufacturing defects.
Common defects to Ring solar panels include:
- Scratches on the panels
- Shattered solar cells
- Gaps between the frame and glass
- Debris in the solar module
If you find any of these defects in your solar panel, contact the store you purchased it from or Ring’s customer support line.
Because Ring solar panels are used outdoors, the wires and solar panels require maintenance.
To do this, you first need to uninstall and reinstall the solar panel.
Follow the steps below to do so:
- Disconnect the wires from your Ring solar panel.
- Carefully examine all wires. Make sure nothing is loose, incorrectly connected, or physically damaged.
- Examine the wire plug for dirt, dust, or debris blockage.
- Reconnect the wires and panel.
- Hold the setup button for about 20 seconds.
- Let go of the setup button, then wait a minute for the camera to reboot.
- Open the settings in your Ring app.
- Reconnect the camera to your WiFi network.
- Ensure your solar panel’s status says “Connected.”
Not only will this help you clear debris off your panel, but it’ll also reboot and clear any potential bugs or glitches.
The Ring solar panel is an eco-friendly way to keep your Ring doorbell or camera charged.
If your solar panel won’t charge, ensure it’s getting enough direct sunlight and that no components are damaged.
If everything looks okay and your solar panel still won’t charge, it usually means your Ring devices are charged enough and do not need supplemental power.
When all else fails, remember that Ring provides a one-year warranty for all their devices.
If your Ring solar panel is still covered, you can contact them to replace it for free.