Blink cameras are perfect for motion detection and night vision, and that’s why many people, especially tenants, opt to install them to boost their security. They’re small enough to mount on small surfaces, but the problem is that many landlords prohibit drilling holes in the wall to mount a security camera. For this reason, many people have considered using Command strip double sided tapes to hold the cameras in place.

As a whole, Command strip double sided tapes are pretty strong and can hold heavier objects than a blink camera. However, the type of climate in your location will determine the longevity of the tape and how often you might need to replace them.

That’s not all, as you still need to know the best place to mount a blink camera using Command strip double sided tape, how to mount a blink camera using Command strip double sided tape, and how to keep the tape sticky for a long time, which you will learn if you read on.

Is Command Strip Double Sided Tape Good for Mounting a Blink Camera?

Not every apartment owner allows drilling in the walls to mount security cameras, but this doesn’t have to stop you from installing them to boost your security. Instead, you should opt for alternative mounting methods, such as Command strip double sided tapes that are just as effective and won’t breach the lease agreement you have signed.

Command strip double sided tapes like this are surprisingly strong and are capable of holding heavier objects than a blink camera. Their stickiness also lasts a long time, especially when placed on a flat surface. You’ll find that they work better on a glass surface, and that’s why a lot of people like using them to mount cameras on windows.

If there is no window or a glass surface near where you want to have the cameras, you can put the tape on any flat surface held on the wall by suction cups.

Some Blink Outdoor cameras have a protruding surface, making it easy to stick them to the Command strip double sided tape.

How Do You Mount A Blink Camera With Command Strip Double Sided Tape?

You don’t need any technical skills to mount a camera using Command strip double sided tape but only the ability to follow simple instructions. Here’s how you do it:

  1. Measure the height from the ground of where you want the camera.
  2. Clean the surface to remove dirt and other debris.
  3. Wipe the surface dry to remove any moisture.
  4. Remove the seal on one side of the tape and stick it to the wall.
  5. Remove the other seal to expose the other side of the tape.
  6. Place your camera firmly on the tape and hold for a few seconds to make sure it sticks.

It’s also critical to measure the distance from the sync module to the camera to make sure the Wi-Fi signal is transmitted without interference. Additionally, don’t mount the camera facing directly at the sun as the light rays might affect the lens. Ensure there are no barriers to prevent the camera from detecting motion.

How Do You Keep the Tape Sticky for Long?

Command strip double sided tapes are pretty strong, but that doesn’t mean the stickiness doesn’t fade after a while. Even so, you can still take some action to improve the tape’s adhesion to ensure it lasts longer:

Shield from the Elements

Although Command strip double sided tapes have an impressive lifespan, they don’t stand a chance against weather elements such as heat from direct sunlight, humidity, or rain. It’s always best to choose a location that is protected from weather elements to mount the camera. If there is no pre-existing barrier to shield the tape, you can construct one using home equipment, such as a small piece of plastic.

Check on the Tape Regularly

Don’t be one of those who install the cameras and forget to check on their status frequently. Instead, make a habit of checking how well the tape is holding at least once a month. This way, you’ll be able to catch any failing tape and replace it in time.

Keep the Area Clean

Dirt and debris affect the adhesiveness of the tape similarly to weather elements. Make sure you clean the area frequently to remove dirt before it affects the tape.

Outro

Security cameras are vital for additional security. They make it easy to identify and track down perpetrators in case of theft or burglary. If your apartment doesn’t allow drilling on walls, you should consider using Command strip double sided tapes as they’re strong enough to hold the camera in place. The tape works perfectly on a glass surface, and the mounting process is very straightforward. Make sure you clean and dry the surface before attaching the tape. Also, be sure to check on the tape’s condition more often and shield it from weather elements to improve its adhesiveness.