Smart Home Starter
The Smart Home Starter team picks the products and services we write about. When you buy through our links, we may get a commission.

Why Is My Treatlife Smart Switch Blinking Red (Easy Fix)

Last Updated Jun 7, 2022
light

Do you have a Treatlife Smart Switch that’s been acting up lately? If so, you’re not alone. Many people have reported that their Treatlife Smart Switch has been blinking red, and it can be a bit of a mystery as to why this is happening.

The Treatlife Smart Switch could be blinking red due to low power or a connection problem. You need to check several things to be sure where the problem lies. There may not even be a problem at all.

If you’re not sure why your Treatlife Smart Switch is blinking red, don’t worry – we’ve got you covered. In this article, we’ll go over some of the most common reasons your smart switch might be blinking red, and we’ll provide some easy fixes for each issue.

Reasons Your Treatlife Smart Switch is Blinking Red

Usually, seeing a light blinking red triggers an alarm and an end-all problem with tech. With the Treatlife Smart Switch, that is most likely not the case. If you notice your Treatlife Smart Switch is blinking red, here are the possible reasons with fixes:

  1. Low power is getting to the switch
  2. The switch is overheating
  3. A faulty connection
  4. Internet connection issues
  5. Nothing is wrong, and it’s in the setup process

Continue reading to learn how to fix each of these issues and troubleshoot why your Treatlift Smart Switch is blinking red.

Low Power

One of the most common reasons your Treatlife Smart Switch might be blinking red is that it’s receiving low power. Check the wiring to ensure that everything is connected correctly.

If you notice that your switch is starting to blink red more frequently, it’s a good idea to fix the power input. Some parts of it may need to be replaced too. You can find replacement accessories for your Treatlife Smart Switch on Amazon. If you don’t feel like you can do this yourself, you should contact an electrician to help.

Switch is Overheating

In some rare cases, your Treatlife Smart Switch might start blinking red because it’s overheating in some rare cases. If your switch is overheating, it’s important to turn it off immediately and let it cool down.

Once your switch has cooled down, you can turn it back on and see if the problem persists. If your switch continues to overheat, there’s possible a hardware issue, and you’ll need to contact Treatlife for assistance.

Check the Internet Connection

Another possibility that your Treatlife smart switch is blinking red is its difficulties connecting to the internet. If it is, there are several things you can do to troubleshoot this.

Reset the Switch

If you’ve tried all of the above fixes and your smart switch is still blinking red, the next step is to reset the switch. This will restore the switch to its factory settings and fix any issues you’ve been experiencing.

If your Treatlife Smart Switch is blinking red, it might mean that it needs to be reset to factory settings. Here’s how to do it:

  1. Make sure the switch is turned off.
  2. Locate the reset button on the switch. 
  3. Press and hold the reset button for about 10 seconds. The switch will blink red during the reset process.
  4. The switch will return to its normal state once the reset is complete.

After the switch has reset, you can set it up again and see if the problem has been fixed.

Treatlife Blinking Red: Additional Considerations

If you’re like some people, you probably wake up dazed and confused by the blinking red light on your Treatlife Smart Switch. You may even reach for the phone to contact Treatlife customer support. But before you do, take a deep breath and relax. We’re here to help you figure out what’s going on.

First of all, it’s important to understand that the red light is not an indication of a problem. It’s actually a normal part of the switch’s operation. When you first plug in the switch, the red light will blink to let you know it’s initializing. Once the initialization is complete, the light will turn off.

If the red light starts blinking after the switch has been plugged in for a while, the switch is trying to establish a connection with the Treatlife servers. This is perfectly normal, and there’s no need to be alarmed. You could have also lost power, and it’s trying to reconnect.

However, if the red light continues to blink for an extended time, it could indicate that there is a problem with your internet connection. If this is the case, you may need to contact your ISP to troubleshoot the issue.

Conclusion

Hopefully, one of the above fixes has helped resolve the issue with your Treatlife Smart Switch. If the light is blinking for an extended period, it could indicate a problem with your internet connection. It’s possible that there is a more serious issue, and you’ll need to contact Treatlife for assistance.

Sign up for our newsletter
Submit
Smart Home Starter
This site is owned and operated by Time Off Club, LLC. Smarthomestarter.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.