The impact of power failure on electronic devices always looks minor until they lead to colossal damage. Then, it is even more of a hassle as obstructions to the flow of electrical current are caused by different factors such as weather, lightning, snow, ice, and broken cables. Another reasonable option is temporary or permanent damage in some of the fundamental units of the power line.
If a Samsung TV refuses to power on at all after experiencing a power cable failure, it may have blown a fuse or a detective power outlet. You can conduct a simple power cycle or drain and check that the outlet supplies a steady flow of electrical current to the TV.
Whatever the cause, the effects of a power failure are disastrous in our modern life, so knowing how to avoid the dangers it could cause would be an excellent place to start playing safe. Keep reading to learn more about how to turn your Samsung TV back on after a power outage.
The reasons for an electrical failure are explicitly classified into two categories. First, a shortage of power is either a brownout or a total blackout. A brownout is simply a slight reduction in voltage. Secondly, it could be caused by a complete wipeout, which is a blackout with a total cut-off from power or an overwhelming increase in the voltage.
The spike in electric current may have burnt out an adaptor in the Samsung TV, interrupting any electricity flow. That is something you should check first.
You can tell if your port is burnt by these signs:
Now, let’s see the next cause for your TV’s lack of power.
There are chances of an extrication outlet getting burnt. These chances are slim but present nonetheless. Try an alternate electrical outlet and power on your TV using the button present.
Four signs to identify a burnt outlet include:
The above signs probably mean that you have a damaged outlet.
Although seemingly inconsequential, dust or dirt on the surface of your TV can lead to this problem. So, detach your TV, dust the dirt that should be blocking a vent and switch it on afterward. Something worthy of note is that a remote could be faulty, so power your TV using the button present on the panel.
A jolt of electricity sometimes causes a glitch in the hardware. To fix this, you may need to simply purchase a new TV. Make sure to check in with Samsung to see if your warranty is still available to prevent you from having to spend so much money again.
While this is only advisable for people knowledgeable about electrical circuits and good with a tool, the capacitor should be thoroughly examined for any signs of damage.
Visual signs are a way you can tell your fuses need to be replaced:
Now, let’s move on to some solutions.
The following steps will help you get your TV working again.
One known way to check if your ports are working on your Samsung TV is to do a power cycle.
Now, let’s check the circuit breaker.
If all other options fall, you should check the circuit breaker to see if a reset could fix it.
Follow these steps:
If this fix doesn’t work, check the next solution.
Any surge protector works by passing the electrical current and an outlet to devices plugged into a power strip. Its primary function is to drive the extra electricity to a grinding wire when there is a power surge.
A surge protector comes highly recommended when trying to avoid the damaging effect of a power outage, but the surge protector could have been damaged in protecting your electronics. Reconnecting directly to the wall could solve the problem. However, a surge protector can be faulty, so you should try plugging directly.
While a power outage cannot always be avoided for various reasons, there are some ways to prevent the damage of your electronics in case of lightning striking.
Here are some preventative measures in case of power failures:
Now you know everything there is to know about Samsung TVs not turning on after a power outage.
Power outages are an inconvenience that cannot be eradicated. However, they can be managed appropriately. Your electronics can be disaster-proof by unplugging all electronics when there is a line failure if the connection is immediately restored. Wait and count up to 100 before you plug or reconnect any device. In many cases, the flow of electrical current may still be unstable, and experts may still be working to regulate it. Blinks on a Samsung TV indicate an inadequate electrical supply, so never ignore it. Some parts may need to be replaced entirely due to the extent of the damage caused.