How to Reset an HP DeskJet 4100 Series Printer

HP PrinterHP Printer

When you buy through our links, we may earn an affiliate commission.

If your HP DeskJet 4100 series printer is experiencing issues, here’s how to reset it:

Soft Reset

  1. Unplug the printer from the power source.
  2. Let it sit unplugged for 60 seconds to 2 minutes. This dissipates any residual electrical charge.
  3. Plug the printer back in and turn it on.
  4. Check if the issue is resolved. The advantage of a soft reset is that it retains your Wi-Fi connection settings.

Hard Reset

  1. Locate the Cancel button and the Wi-Fi button on the printer.
  2. Press and hold both buttons simultaneously until the Power button starts blinking.
  3. Release the buttons. The printer will enter setup mode.
  4. Wait for the Wi-Fi light to start blinking. This indicates the printer is ready for setup.

Reconnect to Wi-Fi

  1. Open the HP Smart App on your device.
  2. Follow the on-screen instructions to reconnect the printer to your Wi-Fi network.

That’s it! These steps should resolve most common issues with your HP DeskJet 4100 series printer.

Keep Reading