Wyze Gate Lock Flashing Green? What Does It Mean And Next Steps

Wyze Gate Locks are making quite a splash in the home security industry as they are an easy and affordable way to enhance your home’s safety. Although you may encounter a few problems with these handy little locks, most issues are fairly simple to fix. You may have already noticed a small light on the gate lock that shows various colors that are meant to communicate the problem the lock is having, so why is your Wyze Gate Lock flashing green?

If a Wyze gate lock is flashing green, it means that the lock is ready to connect to a wireless network. If you notice this light during setup, you are doing it right and should follow the instructions to connect the device. However, if your Wyze Gate Lock is already supposed to be connected, you may need to take the time to reconnect the machine and troubleshoot any issues. 

Luckily for you, we have all the information you need in order to properly connect your Wyze Gate Lock to your wireless internet, and even a few troubleshooting solutions to try if you are having a hard time connecting it. Hopefully, by the end of this article, your Wyze Gate Lock will be working perfectly and you will no longer see a green flashing light. 

What Does It Mean if Wyze Gate Lock is Flashing Green?

As you now know, if you see a flashing green light on your Wyze Gate Lock, it means that the lock is not connected to your WiFi, but it is ready to connect to a wireless network. 

During the initial setup, seeing the green light is a good thing as it means you have reached the point in the installation process where you need to connect the device to your home WiFi network. If you need a little help on how to make this happen, don’t worry, just follow the directions below.

How to Connect a New Wyze Gate Lock to WiFi

Connecting a Wyze Gate Lock to a wireless network is incredibly simple, all you need to do is connect the lockto your smartphone through the Wyze app and follow the prompts.

• The first step is to enable Bluetooth on your smartphone. 
• Plugin the Lock Gateway within 50 feet of your lock. 
• Open the Wyze app and add the lock by following the prompts. 
• Remove the battery cover and hold down the “Pairing” button until the light flashes green. 
• Click “Next” on the app. 
• Enter your WiFi information on the app. 
• The light will turn a solid green if the connection was successful. 

Easy enough right? If you have no problems, then you should never see the green flashing light on your Wyze Gate Lock ever again! However, if it does happen again, don’t panic! You will most likely just need to reconnect the WiFi to your smartphone to ensure the lock stays connected. 

Troubleshooting Connection Problems of Wyze Gate Lock

As you now know, if your Wyze Gate Lock is flashing a little green light, it means it is not properly connected to your home wireless network. 

If the LED light is flashing green after you initially connected it to WiFi, unfortunately, it has disconnected from the network and you will need to reconnect them. 

The good news is, there are a few simple solutions to this problem:

• Ensure your Wyze app is updated to the newest possible version. 
• If it’s still not working, you need to move your smartphone closer to the Gate Lock, as it will need to be connected via Bluetooth. 
• From then, you can turn off your phone’s WiFi and Bluetooth and turn it back on again. 
• Still not connecting? Try restarting your smartphone. 
• As a last resort, you should move the Gateway to another outlet that is closer to the router. 

While one of these solutions should definitely fix the problem, if after trying each one, the little green light is still flashing, you will probably need to contact Wyze support. 

Final Thoughts

The LED light on your Wyze Gate Lock can tell you quite a bit about what is going on with your lock, and if it is flashing green, your Gate Lock is telling you it is ready to be connected to the internet. 

Hopefully, you now understand exactly what to do when you see the green light flashing, but in case you need a recap, here are the quick instructions: 

After the initial setup, you should connect your phone to the lock through Bluetooth, add the lock to the Wyze app, then sign into your home WiFi. 

If the lock is consistently disconnecting to the wireless network, you will need to follow the directions above to help the lock stay connected.