How to Turn On Noise Canceling On Beats Studio 3
You just got a new set of Beats Studio 3 headphones but don’t feel like shuffling through all of the manuals and advertisements that come with your new electronic. The noise-canceling feature was probably a large factor concerning your decision to purchase them. So, how do you turn on the noise canceling on these headphones?
Pure Ambient Noise Cancellation (Pure ANC) is on by default on each power-up of your Beats Studio 3 headphones. To manually turn the feature on once your headphones are connected to your device, double-press the power button.
That was simple enough, but there are probably other questions in your head now that there is no outside noise to distract you. Continue reading as we answer some related questions regarding your new Beats Studio headphones.
Why Does My Beats Studio 3 Noise Canceling Keep Turning Off?
The default setting for Pure ANC is on upon power-up. But what if you are experiencing the noise canceling feature turning off during use of your Beats Studio 3 headphones?
Hold the power button and volume down button for 10 seconds. When the LED lights start to flash, your headphones have been reset and you can release the buttons.
Why Do My Beats Studio 3 Headphones Leak Sound?
Beats Studio 3 headphones are supposed to be noise-canceling so you can enjoy what you’re listening to without hearing your outside environment, so why is the sound leaking?
When your headphones ear cups fail to stop air vibrations from escaping, it is known as sound leakage. The reason why your Beats Studio 3 headphones may be leaking sound is because the ear pads or foam tips may be damaged.
If the damage to the ear cups is substantial, they may need to be replaced. You can find more on how to do this below.
How to Replace Ear Pads On Beats Studio 3 to Prevent Noise Leaking
If you would like to replace your ear cushions, there are a few steps you need to follow.
- Purchase a replacement kit like the ones found here.
- Remove old ear pads with the tool from the new kit and clean old glue residue.
- Wipe each side and clean with the included alcohol wipes.
- Make sure you have the correct side for each ear pad, remove the adhesive covering, and use the knobs on the inside of the earphones to guide your installation.
- Once you have each one correctly installed apply pressure for 10-30 seconds to seal the glue.
Now that we have our ear pads installed, let’s talk about some other features of the headphones.
What Is the Noise Transparency Feature On Beats Studio 3?
You know that the noise canceling feature on Beats Studio 3 headphones cancels out the noise around you. But what is the noise transparency feature?
Noise transparency is the inverse of the noise cancellation feature. When you want to hear your surroundings better while still wearing your headphones, use the transparency feature. Your headphones will act as a hearing aid as the feature slightly amplifies outside noise.
Solo Beats Headphones VS. Studio Beats Headphones
Now that we have discussed some of the features of the Studio 3 headphones, let’s discuss how they stack up to some of the other offerings from Apple.
This table will be used to compare some of the big features between the two headphones:
|Features||Solo Beats||Beats Studio 3|
|Battery Life||Up to 40 hours||Up to 22 hours (Full Features) Up to 40 (No Features)|
The Solo Beats headphones are the lower-priced offering from Apple. The Beats Studio 3 headphones have a better build and better features like noise cancelation, so it will be up to you to choose whether features or price is more important.
Cheaper Alternatives to Beats Studio 3 Noise Canceling Headphones
While Solo Beats headphones are cheaper than the Beats Studio 3 headphones, they still are both pricey, like most Apple products are. What are some even cheaper alternatives that also have a noise canceling feature?
Sony Noise Canceling Headphones WHCH710N
These headphones provide good value and are comfortable to wear. Sony is very experienced in the headphone market so even though this product is at a lower cost, the software behind it is up to par. The battery life is very good and even with the noise cancellation feature on, it can top 35 hours before you have to recharge.
Skullcandy Hesh ANC Wireless Over-Ear Headphones
Coming in at an even lower price than the Sony headphones mentioned above is this offering from Skullcandy. Users have been impressed with the noise-canceling feature of these headphones. One drawback though is that the software and app offerings are not as strong as Sony, but at the price the value is undeniable.
Soundcore by Anker Life Q30 Hybrid Active Noise Canceling Headphones
Although these headphones are the lowest priced of the headphones mentioned, they are the highest rated. They feature all of the bells and whistles you are looking for like a 40-hour battery life and really a good noise-canceling feature.
Consumers say that these headphones are comfortable to wear and can also get very loud. They also say that the build quality is very good for the asking price.
Conclusion: Are Beats Studio 3 Headphones Right for You?
There are many factors to consider when purchasing new headphones. The noise canceling features are very good on these headphones but they are also missing some popular features like transparency. While the Beats Studio 3 headphones lean more to the expensive side, there are some lower-cost alternatives that can give you the features you are looking for.