Smart Home Starter
The Smart Home Starter team picks the products and services we write about. When you buy through our links, we may get a commission.

Error 14 On Roomba: What It Means and How To Easily Fix

Last Updated Sep 25, 2022
roomba in room with dog

If you have a Roomba robot vacuum, you probably already know how handy this little appliance is! It can clean your home without you even lifting a finger, but only if it’s functioning properly. So if you see an error-14 on Roomba, you’re probably wondering what it means and, more importantly, how to fix it. 

Error-14 on a Roomba robot vacuum means that the machine is not detecting an installed bin. You need to either ensure it is installed correctly, clean the Roomba of dust and grime, try restarting or resetting the device, or you may need to replace the dust bin. 

In this article, we are going to find out not only exactly what the error-14 message means on a Roomba vacuum but also the 4 ways to easily fix the problems right now so you can get back to enjoying hands-off cleaning in no time. 

What Does Error-14 Mean on Roomba?

No matter which Roomba vacuum you have, and there are quite a few models, the error-14 or error-1-4 message always means the same thing: The dust bin needs installing, cleaning, or replacing. 

Roomba suggests that you should be removing the bin and cleaning it after every use, especially if you have pets as their hair will certainly clog up the bin quickly. 

If you are not cleaning your bin consistently, or you do not replace it correctly after servicing, it’s likely that you will receive the error-14 message. But, luckily, there are 4 easy ways to fix the problem 

4 Ways to Fix an Error-14 Message on Roomba

To understand why you are getting the error-14 message on your Roomba, realistically you will have to try to fix the problem first. 

But the good news is that each of these easy fixes only takes a few moments, and you should have your Roomba up and running smoothly again in no time!

Ensure the Bin Is Installed Correctly

One of the most common problems Roomba users encounter is that the bin was simply not replaced correctly after the last time it was cleaned. 

If you see an error-14 message, first try to remove the bin and reinstall it to ensure it’s inserted correctly. 

That may have solved your problem! But if you are still getting the error message, don’t worry; there are 3 more solutions to try. 

Clean the Roomba

It may also be that you simply did not clean the dust bin or didn’t clean it correctly, which is why you are seeing the error-14 message. 

Roomba recommends whipping the bin with either a damp cloth or magic eraser after each and every use to ensure all the little bits of dust and hair are removed. 

While not all of us clean the dust bin after every time the Roomba makes a sweep of the house, it is important to clean it thoroughly if you have received the error-14 message as that could solve the problem in just a few minutes! 

Once the bin is properly cleaned and installed properly, the device should function normally. 

Restart the Roomba

If you’re still seeing the error-14 message, you should restart the machine. Although it may seem silly, usually, unplugging and then plugging a device back in solves most problems! 

Leave the Roomba unplugged from the wall and the vacuum powered off for a few minutes before turning it back on. 

Now, if the error message is still popping up, there is one more tactic to try. 

Replace the Dust Bin

If none of these easy fixes did the job, unfortunately, you may need to actually replace the dust bin. 

Whether you have had the Roomba for a long time, or it simply sees a lot of use around your home, the dust bin might be overworked and cleaning it just won’t cut it anymore. 

While you can purchase a new one as a replacement part from Amazon, they can be a little pricey.  

Before you shell out for a new dust bin, you should reach out to Roomba as they might replace it for you if the vacuum is still under the one-year warranty the company provided. 

Final Thoughts

If you have a Roomba iRobot vacuum, you probably already know all the wonderful features the device has to offer.

However, in order to enjoy this hands-free cleaning device, it has to be working properly! 

When you see the message error-14 on a Roomba vacuum, it means that there is a problem with the dust bin. 

But now you know not only what the message means, you also understand how to fix it! 

Just remember, you should first ensure that the bin is installed correctly, then make sure it is clean, try restarting the device. 

If all else fails, you may need to purchase a new bin for your Roomba. 

Sign up for our newsletter
Smart Home Starter
This site is owned and operated by Time Off Club, LLC. is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.