Can You Turn Off the Light on a Westinghouse TV?
Many modern televisions, including certain Westinghouse models, include a small LED light that stays on at all times, even when the screen is dark. If you’re sensitive to light or want to conserve energy, you may be wondering if there’s any way to turn it off.
You can turn off the light on Westinghouse TVs the use the light to signify the TV is on. However, the light on some Westinghouse TV models means the TV is in standby mode, so that light cannot be turned off.
Below, we’ll discuss more information on what exactly this light means, as well as some ways you may be able to turn it off. Keep reading to learn everything you need to know!
Many modern televisions have a small LED light at the button of the bezel. Depending on the model you have, this light could be in the lower left-hand corner or, the lower right-hand corner. It’s usually red, but some models use a blue or green light instead.
In short, this light often indicates that your Westinghouse TV is in standby mode. Most televisions today use standby mode to reduce the amount of time it takes your TV to turn on when you’re ready to watch your favorite shows.
Standby mode is essentially “sleep mode” for your television set. When you press the power button on your remote, the screen will go dark, but the TV will not power down completely. The main reason for this is that it reduces the amount of time it takes for your television to turn back on when you want to watch it, but there are a couple of other benefits, as well.
Standby mode allows your TV to perform critical updates during the night, reducing the chances of it needing to update during times in which you want to watch shows or movies. It also allows your cable or satellite box to keep up with scheduled recordings, even if the TV is not “on” while the show is airing.
Whether or not you will be able to turn off this LED indicator light depends on the Westinghouse television model you own. While most only use this light for standby mode, some will keep it illuminated even when the TV is turned off completely.
Below, we’ll discuss a few tricks you can try that may get rid of any light you see, including:
- Powering down your TV
- Turning off connected devices
- Using tape to cover the light
- Unplugging your TV
Depending on the model you own, pressing the power button on your remote just once may automatically put your TV in standby mode. If you press the button once and the screen goes dark, but the LED light remains, try pressing the power button once more. This might turn the TV off completely, turning off the standby light at the same time.
If this doesn’t work, try pressing and holding the power button for at least five seconds. Some televisions require a longer button press like this to power down.
If you have any devices connected to your television, the power they’re drawing to or from your television may be preventing this light from turning off. Try turning off any of the following devices and seeing if this triggers the light to turn off:
- Gaming consoles
- External speakers
- A cable or satellite box
- An HDMI streaming stick
If the light from the LED indicator bothers you while you’re trying to sleep, you could try putting a piece of solid-colored tape over it at night. This is especially helpful if you want to leave standby mode on for whatever reason.
However, make sure to remove this tape before you use your TV again, as it could block the sensors that allow the TV to pair with your remote control.
If all else fails, you could unplug your TV when you’re not using it to turn this light off. However, keep in mind that unplugging your television for a significant period of time could cause it to reset all your settings, log you out of certain streaming services, and take much longer to turn back on when you want to watch it again.
These days, many Westinghouse televisions include a small LED light on the bottom of the bezel. Depending on the model you own, it may or may not be possible for you to turn this light off. It usually indicates that the TV is in standby mode, but some will illuminate the light even when the device is powered off completely.