Smart Home Starter
The Smart Home Starter team picks the products and services we write about. When you buy through our links, we may get a commission.

Beats Studio Buds – How to Easily Reset in 4 Steps

Last Updated Jul 5, 2022
Woman putting in earbuds

Beats Studio Buds provide one of the best Beats earbuds experiences. But, when things go awry and your earbuds stop functioning, you may want to know how you can easily reset them and resume your wireless listening experience as soon as possible.

Below, we will discuss four easy steps you can take to reset your Beats Studio Buds. Keep reading to fix your earbuds and get back to listening to your favorite songs!

How to Easily Reset Your Beats Studio Buds in 4 Steps

When your earbuds suddenly stop functioning, the most important thing to remember is to keep calm! You can reset your Beats Studio Buds by carefully following these steps:

  • Place the two earbuds in your charging case.
  • Leave the case lid open.
  • Press the System button.
  • Release the System button.

Read below to learn the exact process for resetting your Beats Studio Buds!

Place the Two Earbuds in Your Charging Case

The first step you will need to take to reset your Beats Studio Buds is to place the earbuds in the case. You can only reset them while they are inside this case. In addition to charging and general protection, this case also helps perform corrective functions like resets.

Leave the Case Lid Open

After placing the earbuds inside the charging case, do not close the lid. You will need to leave the lid open to execute the rest of the reset process.

Press the System Button

There is a System button inside the charging case, right between the two earbud beds. Press and hold this button down for about 15 seconds to initiate the reset process.

Release the System Button

Release the System button once the LED light indicator begins flashing red and white. These red and white flashes indicate that your Beats Studio Buds are completely reset and you are good to go.

It should not take more than 15 seconds for the flashes to begin. If you’re holding down much longer than that with no sign of red and white flashes, your earbuds may be faulty.

If the Reset Doesn’t Work, What Next?

You have tried the tips mentioned above, yet your Beats Studio Buds continue to malfunction. What exactly should you do next? Well, here is an alternative: restart your earbuds.

Turn off the buds by pressing down the Beats logo on each headphone. Then, turn them back on by pressing the same button you used to turn them off.

If you’ve tried both restarting and resetting your Studio Buds to no avail, they are most likely internally faulty. At this point, you may want to visit your local Apple Store to see if your buds can be salvaged or if they are totally beyond redemption.

What Can Cause Malfunctions to My Studio Buds?

The biggest causes of Beats Studio Buds malfunctions are environmental stressors. These can include:

  • Water damage
  • Dropping your earbuds
  • Extremely hot or cold temperature exposure
  • Dirt, sweat, and other debris inside the earbuds

Because all these factors can severely damage your Beats Studio Buds, it’s important to remember to always be gentle with them. Clean the inside of the buds regularly, as well as the charging case, and avoid leaving them in the car on hot summer or cold winter days. You need to be aware of these potential threats to continue using your Studio Buds comfortably for a long time to come.

Update Your Beats Studio Buds for Optimal Function

All electronic devices, whether you’re dealing with a smartphone, computer, or even wireless earbuds, need to be updated regularly to keep them working efficiently. This also applies to your Studio Buds.

In fact, if you do not update your Studio Buds, they may stop working altogether. If resetting your earbuds did not fix your problem, check for available updates to see if this brings them back to life.

The process for updating your Beats Studio Buds will depend on the type of device you’re using. iPhone users will not need to check for updates manually, as any available upgrades will be automatically installed.

However, if you’re an Android user, you will need to download and install the Beats Updater App from the Google Play Store. Connect your earbuds to the app, then check for updates in the Notification tab.

The Bottom Line

If your Beats Studio Buds stop working seemingly out of nowhere, your first course of action should be to follow the four steps listed above to reset them. If that doesn’t work, you can try restarting or updating your earbuds.

If none of the tips above prove useful, a visit to your local Apple Store may be necessary. As useful as your Studio Buds are, it’s important to remember that they need proper and careful care and handling to last as long as possible.

Sign up for our newsletter
Submit
Smart Home Starter
This site is owned and operated by Time Off Club, LLC. Smarthomestarter.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.